Categories:
RadioPro,
RadioPro IP Gateway
Yes.
The system uses a Gigabit Ethernet interface (1000 Mbps) and an asynchronous TCP socket architecture capable of high-throughput communication.
Actual throughput depends on deployment conditions and workload. In typical implementations, throughput can range from hundreds of Mbps under light load to lower sustained rates under heavier processing conditions.
It is important to note that RadioPro™ applications require relatively low network bandwidth (approximately 2.2 kBytes/s with audio compression, or 22 kBytes/s without), so Gigabit Ethernet provides ample capacity for reliable operation with significant headroom.