How many RadioPro IP Gateways do I need for multiple channels or talkgroups?

Last updated:

Design your starting point

Interactive equipment planner

Build your RadioPro system

See how independent voice channels, Dispatch positions and connected users change the equipment and licensing plan.

Try an illustrative starting configuration

This example applies the same Solo/Talk peak to every Gateway. It counts connected sessions, not everyone’s usernames. The input ranges keep this illustration manageable; they are not product capacity specifications.

2Independent voice paths
2Control station / Gateway pairs
2Dispatch PC licenses
5Solo/Talk slots per Gateway
RadioPro example system2 control stations and Gateways, 2 Dispatch PCs, 5 Solo/Talk connections per Gateway.VOICE CONTROL STATIONSIP GATEWAYS1Rear interface2Rear interfaceCONNECTED OPERATORS2 Dispatch PCsEach licensed for 2 Gateway connections2 Solo PCs + 3 Talk devicesPeak connected on each Gateway5 Solo/Talk slots per GatewayThese clients share that Gateway’s radio.LAN / approved remote connectionEach row is an independent voice path. Users on one row share its radio.

2 simultaneous paths · 2 Dispatch positions · the same 5-connection Solo/Talk peak applied to every Gateway.

Your example equipment list
QuantityItemPlanning basis
2Voice control station radiosOne per independently accessed voice path
2RadioPro IP GatewaysOne per voice control station
2RadioPro Dispatch licensesEach sized for 2 Gateway connections
5 per GatewaySolo/Talk connection slots2 Solo + 3 Talk; 10 slots across 2 separate pools
Specify for siteAccessories and installationAntennas, power, network, microphones/headsets, programming and commissioning

A Solo or Talk session connects to one Gateway at a time. Its connection capacity belongs to that Gateway; these pools are not interchangeable. More users on one radio do not create another simultaneous voice channel.

How this planner counts equipment

Each independently accessed simultaneous voice channel or talkgroup is modeled as one voice control station and one IP Gateway. Several programmed channels on one donor radio do not create several independent receivers.

Every Dispatch PC is counted as its own appropriately licensed position, sized for the selected Gateway connections. Solo and Talk capacity is counted separately on each Gateway. Adding those pools gives a provisioning total, not a shared pool that a user can borrow across Gateways.

Your final design must verify radio models, system type, supported versions, installed license capacities, GPS/data-revert equipment, antennas, power and backup, network paths, audio accessories, programming and installation. The presets illustrate quantities; they are not approved designs or priced packages.

Planning basis: RadioPro system overview and IP Gateway installation guide. Discuss the resulting list with your authorized dealer.

Plan one RadioPro IP Gateway and one voice control station radio for each channel or talkgroup you need to access independently at the same time.

Example: three simultaneous voice paths, with appropriate Dispatch connection licensing.
Example: three simultaneous voice paths, with appropriate Dispatch connection licensing. Open full-size diagram

One control station may be programmed with many channels and allow a client to select among them. Changing its selected channel does not create multiple independent voice paths.

Example: if a dispatcher must continuously hear three separate channels at once, plan three voice control stations and three Gateways. If the user only needs to select one of those channels at a time, a single compatible radio/Gateway may be suitable.

Scanning, where supported by the radio system, also differs from having a dedicated receiver for each channel and can miss simultaneous traffic.

Data-revert radios used for GPS do not add independent voice channels. Your dealer should size the Gateway count and Dispatch connection licenses around the actual concurrent voice requirement.

Documentation

Back to RadioPro IP Gateway